Japan's MITSUBISHI mαφ​otor ZA magnetic powder
Introduction of this producσ ♣£t:
The magnetic powder clutch (brake) useΩ↔ must be matched with magnetic powde'λ≥r, magnetic powder on the magnetic↔&≤¥ particle clutch (MPB) of the w£←>$orking chamber, plays a key role ™<λΩin the work, content selection, mag≠'>☆netic material, metho™>d of particle size and the p∏¥roper use of the magnet↕π•ic powder clutch (brake) &±♠✔the use of time, work effic≈ iency during the work, whe↑<λ‍ther the normal play ↑Ωa very important factor. Fill in t  ≤≠he machine powder aft↕•er a period of use, €Ωthe torque will be reduced to λ‌less than the required tension↕←, then must be replaced with neε$w magnetic powder, magnetic powder λ'is the practical choi>♠₽ce of consumables, so the ε★÷magnetic powder can raise working ef↑€ ficiency and prolong ε≈↓the service time. To reduce t≤±•¶he cost, but also can exten× d the magnetic powder clutch (magn →'₽etic powder brake use ti± ↓me).
Magnetic particle is some s₹¥mall size and high magnetization and abσαrasion resistance of iron particles, eε§∑€very grain of the iroε​♣n particle size about 40 αδmicrons; when the ma& gnetic coil not conductive, torque w<¥‍♦ill not be transmitted on the×"σ clutch or brake. The c₹δoil flux, due to the acti&©>δon of the magnetic force p←¶ roduced hardening phenomeno↔$£ n and attract magnetic powder, continuo&φ✘↓us sliding between the will f©♥rom the clutch or brake transmis♠'φsion torque.
Ingredients: iron, cobalt, nick>&<el
Uses: applicable to the machin ₽•e, laminating machinπ↕§e, coating machine, printing machi §₹nery, food machinery, bag making machi'≤♠ne, equipment of magnetic powder clutchβ'↓©, brakes, single shaft, and ™ ​double shaft, hollow shaft♦÷, can restore the tension and t≠≠÷orque balance. Magnetic partic‍≠le uniform, widely used in papermakiΩ↕≤ng, printing and other industrie♥≠s
Magnetic particle clδ¶δ©utch and magnetic particle size ↔±matching:
Magnetic particle clutch 39 ↔σG magnetic powder 2.5kg--←"₽↔
Magnetic particle clutch 5kg  ‌- magnetic powder 60g
Magnetic particle clutch 117g magn≠ ‌✔etic powder 10kg--
Magnetic particle clutch 255g magnetic π×β₹powder 20kg--
Features of this product:
Curie, 1, up to 1020 degrees, us←≠♥→e for a long time, i¥®₹₽n the complex environment of fact ≤♠ory production, up to 8000120✘§  00. Strong adaptability, good s  ☆tability under high    &temperature, high te↑γ€mperature resistance, wear resis‍™®★tance, sintering, fire does ↓≤‌not occur during use.
2, at the same time the p♥ ₽owder magnetic saturation induct&βion 0.9--3.5T and granulari↔≈ty for 20-60 um, uniform particle size ↓ distribution, crystal st✘ ™ructure, specific surfac✔'e area, particle size >λ∏₽distribution, basic magnetism, coe♠↔ rcivity temperature coefficient and<↑γ the rheological property of th←←e performance can reach the advaγ nced level of similar products in Ja♠₩$pan.
3, the magnetic powder an₹¥≤€d the Japanese magnetic powder, the harλ↕♣¶dness is good!
4, can very well at home and a✘↓∞​broad of magnetic powder brak♦∑​e and clutch matched and no ♠σ♦ damage to the magnetic powder<π brake and clutch, after us₩‍≈e can still maintain a smo↓×☆↓oth, no corrosion.
Attention should be paid​☆ to the use of:
1, do not use continuous idΩ←ling conditions, will redu®★ce the magnetic life.
2, pay attention to the mag♣∏netic particle moisture,§¶™ please use the sealing ring. ₹>♣When the magnetic powder damp, it∞↓←♦ will lead to its unstable perfor∞"≠©mance and reduce.